Description
Specifications
Description
This Shaded Pole and PSC Direct Drive Fan Motor is an open air over replacement.
Features
Features
- 3.3" Diameter
- Four 8-32 x 3/4" stud extensions at each end
- Ball bearings have all angle thrust system
- Automatic reset thermal overload protector
- Open Air Over
- PSC design with capacitor included
- 12" Leads
California residents: see Proposition 65 Warning
Specifications
Weight | 5 |
---|---|
Height | 3.39 |
Length | 3.78 |
Width | 3.39 |
Amps | 0.48-0.66 |
Bearing Type | Ball |
Brand | U.S. Motors |
CUL Recognized | No |
Capacitor MFD µF | 2 |
Country of Origin | CHN |
Cubic Measurement | 0.0251 |
Cycle/Hertz | 50/60 Hz |
Dimensional Weight | 2 |
Duty | Continuous (S1) |
EAN | 0786382010973 |
Full Load Amps | 0.48-0.66 |
Insulation Class | B |
Lead Length | 24" |
Motor Enclosure | Open Air Over (OPAO) |
Motor HP | 1/15 HP |
Motor Type | PSC (Permanent Split Capacitor) |
NEMA Frame | 3.3 |
Number of Speeds | 1 (Single) |
Package Height | 5.5 |
Package Length | 8 |
Package Weight | 5 |
Package Width | 4 |
Phase | Single |
Prop 65 | No |
Protection | Automatic |
RPM | 1550 |
Rotation | Clockwise (CW) |
Service Factor | 1 |
Shaft Diameter | 0.3125" (5/16") |
Shaft Length | 3" |
Substantial Commodity | Steel; Copper |
Thermal Protection | Yes |
UL Recognized | Yes |
UPC | 786382010973 |
Voltage | 230 VAC |