Description
Specifications
Description
These beam clamps are designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4” (19.05mm). The open U design permits rod adjustment. The universal design allows it to be used in an inverted position on the bottom flange of a beam as well.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf specification sheet
Specifications
Weight | 0.34 |
---|---|
Height | 1.5 |
Length | 1.625 |
Width | 0.75 |
Brand | PHD |
Composition | Low carbon Steel with hardened Steel cup point set screw, locknut |
Country of Origin | USA |
Cubic Measurement | 0.0011 |
Diameter | .5" |
Dimensional Weight | 1 |
For Use With | #141 5"-8", #143 5"-8" , #151 2-1/2"-3-1/2", #152 5"-6" , #155 #2-#5 , #180 2-1/2"-5", #181 2-1/2"-5" , #182 2-1/2"-4", #420 3" , #430 2-1/2"-3-1/2" , #440 2-1/2"-3-1/2" , #441 2-1/2"-3-1/2" , #442 2-1/2"-4" , #450 2-1/2"-3-1/2" , #450F 2-1/2"-3-1/2" , #451 2-1/2"-3-1/2" , #451F 2-1/2"-3-1/2" , #455 #2-#5, #456 #2-#5, #470 2-1/2"-3-1/2" , #508R 2-1/2"-4", #510R 2-1/2"-4", #512 2-1/2"-4", #512H 2-1/2"-4" , #970 2-1/2"-3-1/2" , #970F 2-1/2"-3-1/2" |
Package Height | 1.5 |
Package Length | 1.625 |
Package Weight | 0.34 |
Package Width | 0.75 |
Prop 65 | Yes |
Size | 1/2" |