Description
Specifications
Description
EBD (Electronic By-Pass) style dampers are self-contained units that give you the static control mounted to the damper. It is an "all-in-one" design that makes the installation process much easierand can be adjusted in the field between 0.5" to 4" of pressure withthe turn of a set-screw. Requires 24VAC to operate. Tubing and pitot tube are included.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf submittal sheet
picture_as_pdf consumer catalog
picture_as_pdf installation instructions
picture_as_pdf specification sheet
Specifications
| Weight | 7.8 |
|---|---|
| Height | 14 |
| Length | 14 |
| Width | 14 |
| Ambient Temperature Range | -20°F to 160°F (-28.89°C to 71.11°C) |
| Amps | 1.5 |
| Brand | EWC® |
| Composition | Steel |
| Country of Origin | USA |
| Cubic Measurement | 1.588 |
| Cycle/Hertz | 50/60 Hz |
| Damper Type | By-Pass Damper |
| Dimensional Weight | 20 |
| EAN | 0845484005192 |
| Emergency Heat Switch | No |
| Heat Pump Compatible | Yes |
| Maximum Temperature | 185°F (85°C) |
| Mounting | Crimped edge |
| Network Zoning | No |
| Package Height | 14 |
| Package Length | 14 |
| Package Weight | 7.8 |
| Package Width | 14 |
| Phase | Single |
| Prop 65 | No |
| Shape | Round |
| Size | 10" |
| UPC | 845484005192 |
| Voltage | 24 VAC |