Description
Specifications
Description
The TR low pressure unit is a two position, spring open, power closed supply air damper.
Features
Features
- Maximum pressure differential of .5" W.C.
- Fabricated from 22 gauge steel
- Cylinder features three rolled beads which provide maximum structural integrity
- Trailing end is crimped for ease of installation
- Positive air seal is accomplished without the use of gaskets, linkages or set screw adjustment
- 24V ac, full stall motors, which do not require use of end switches to terminate travel
- Equipped with a motor terminal board, which also provides a damper closed LED indicator
- Can be paralleled to provide additional CFM capacity when required
- Easily removed for damper shaft and gear inspection
California residents: see Proposition 65 Warning
Documents
picture_as_pdf submittal sheet
Specifications
| Weight | 7.5 |
|---|---|
| Height | 14 |
| Length | 14 |
| Width | 12 |
| Amps | 0.5 |
| Brand | Zonex |
| Composition | The 6" – 10" Damper cylinders are fabricated from 24 Gauge Steel: the 12" – 18" cylinders from 22 Gauge Steel, Each cylinder features three rolled beads, which provide maximum structural integrity, The trailing end is crimped for ease of installation, Pos |
| Country of Origin | USA |
| Cubic Measurement | 1.3611 |
| Cycle/Hertz | 60 Hz |
| Damper Type | Zone |
| Dimensional Weight | 26 |
| Emergency Heat Switch | No |
| Heat Pump Compatible | Yes |
| Mounting | Inline with duct system |
| Network Zoning | No |
| Package Height | 14 |
| Package Length | 17 |
| Package Weight | 10 |
| Package Width | 15 |
| Phase | Single |
| Prop 65 | No |
| Shape | Round |
| Size | 12" |
| Voltage | 24 VAC |