Description
Specifications
Description
This multi-speed, constant torque, brushless DC motor is designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers, and package systems that were designed with a standard ECM motor, such as an X13 or equivalent competitor model.
Features
Features
- Automatically determines motor direction using Genteq’s Rotation Sensing Technology.
- 5 discrete speeds using 24VAC (3 using 18VDC)
- Low voltage signal harness provided
- Operating speed range of 600 -1200 rpm
- NEMA 48-frame (5.6 inch diameter) Belly Band Mount with 5-1/2" diameter shaft.
- Maintains ECM-level Efficiency up to 80%
- Soft start and Off Ramp for quiet operation
- Encapsulated electronics
- 4kV Surge protection
- Electronic overload protection
- UL and CSA recognized component
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer catalog
picture_as_pdf installation instructions
picture_as_pdf specification sheet
picture_as_pdf consumer literature
Specifications
| Weight | 16 |
|---|---|
| Height | 8 |
| Length | 16 |
| Width | 8 |
| Amps | 8.4 |
| Bearing Type | Ball |
| Brand | Genteq® |
| CSA Listing | No |
| CUL Listed | No |
| CUL Recognized | No |
| Country of Origin | MEX |
| Cubic Measurement | 0.5926 |
| Cycle/Hertz | 60 Hz |
| Duty | Continuous (S1) |
| EAN | 0815585020509 |
| Full Load Amps | 8.4 |
| Insulation Class | B |
| Motor Enclosure | Open Air Over (OPAO) |
| Motor HP | 3/4 HP |
| Motor Type | ECM (Electronically Commutated Motor) |
| Mounting Type | Round |
| NEMA Frame | 48 |
| Number of Speeds | 5 (Five) |
| Phase | Single |
| Prop 65 | No |
| RPM | 1075 |
| Rotation | Reversible |
| Service Factor | 1 |
| Shaft Diameter | 0.5" (1/2") |
| Shaft Length | 6.5" |
| Substantial Commodity | Steel; Copper |
| UL Recognized | Yes |
| UPC | 815585020509 |
| Voltage | 115 VAC |