Air Velocity and Temperature Accessory Head

The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register's free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes.

Standard Features

• Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges and our detachable leads.
• Measures air velocity and measures air temperature.
• Measure in hard to reach areas using detachable test leads.
• Display readings smoothly in average mode or switch to real-time measurement.
• Low battery indicator.
• Auto-power off after 10 minutes (may be disabled).

Weight	0.50 Pounds
Length	13.50 Inches
Width	6.25 Inches
Height	2.00 Inches
Country of Origin	TWN
Brand	Fieldpiece®
Power Source	9V Battery
Air Velocity Accuracy	±3% + 1digit @ 73°F±5°F (23°C±2°C),
Batteries Included	Yes
Auto Power Off	Yes
Display	No
Calibration Certificate	No
Data Hold	No
Includes Case	No
Color	Yellow
Features	Connects to Fieldpiece meters, data loggers and EHDL1 electronic handle - Converts digital multimeters with mVDC range using H26-127 (ADLS2) leads with anemometer - Calculates CFM from chart - Displays: FPM, MPH, KPH, MPS and temperature - Temperature
Operating Temperature Range	32°F to 120°F (0°C to 48.8°C)
Temperature Accuracy	±1°F at 32°F to 113°F; ±2°F at -4°F to 32°F, 113°F to 140°F (±0.5°C at 0°C to 45°C; ±1°C at -20°C to 0°C, 45°C to 60°C)
Temperature Range	68°F to 140°F (20°C to 60°C)
Type	Anemometers
Velocity	60-5900'/min, 0.7-67.0 mph, 0.3-30.0 M/s, 1-108 KM/hr
Warranty Offered	Yes