Description
Specifications
Parts List
Description
Amana® AKSS Series Gas Furnaces offer energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. Quality manufacturing as well as easy installation and maintenance make this unit one of the best values on the market.
Standard Features
Standard Features
- Heavy-duty Million-Air® stainless-steel, dual-diameter, tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Single-stage gas valve
- Durable silicon carbide ignitor
- Quiet single-speed draft inducer
- Self-diagnostic control board
- Color-coded low-voltage terminals
- Multi-speed blower motor
- All models comply with California Low NOx emissions standards
- Multi-position installation: upflow, convertible horizontal left or right with kit
- Certified for direct vent (2-pipe) or non-direct venting
- Easy-to-install top venting with optional side venting
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak)- 2%
- Heavy-gauge steel cabinet with durable baked-enamel finish
- Foil-faced insulated heat exchanger
- Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air inlet applications
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf specification sheet
picture_as_pdf use & care instructions
picture_as_pdf warranty document
Specifications
Weight | 157 |
---|---|
Height | 44 |
Length | 29.5 |
Width | 25.5 |
AFUE | 92.1 |
AHRI - Usage | Indoor AHU |
Air Flow Direction | Upflow |
BTU Input | 92000 |
BTU Input | 92000 |
BTU Output | 86000 |
Blower Motor HP | 3/4 HP |
Blower Motor RPM | 1075 |
Blower Motor Speeds | 4 (Four) |
Blower Motor Type | PSC (Permanent Split Capacitor) |
Blower Wheel Diameter | 11" |
Blower Wheel Width | 10" |
Brand | Amana |
CFM | 2000 |
Cabinet Width | 24.5 |
Country of Origin | USA |
Cubic Measurement | 19.1545 |
Cycle/Hertz | 50/60 Hz |
Dimensional Weight | 247 |
Draft Inducer Speeds | 1 (Single) |
EAN | 0663051487352 |
ETL Listed | Yes |
Energy Star Rated | No |
Equipment Type | Furnace |
FER Compliant | No |
Filter Size | 16" x 25" x 1" / 20" x 25" x 1" |
Fuel Type | Natural Gas |
Full Load Amps | 11 |
Furnace Type | Gas |
Gas Connection Size | 1/2" |
Gas Connection Type | NPT |
Heating Stages | Single Stage |
Ignition Type | Hot Surface (HSI) |
Includes Filter Rack | No |
Maximum Overcurrent Protection (MOCP) | 15 |
Package Height | 44 |
Package Length | 29.5 |
Package Weight | 157 |
Package Width | 25.5 |
Phase | Single |
Product Family | AKSS92 |
Prop 65 | Yes |
Substantial Commodity | Steel; Copper; Aluminum |
UL Listed | No |
UPC | 663051487352 |
Voltage | 115 VAC |