Description
Specifications
Parts List
Description
Amana® AMH Series Gas Furnacs offer energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. Quality manufacturing as well as easy installation and maintenance make this unit one of the best values on the market.
Standard Features
Standard Features
- MillionAir® stainless-steel, dual-diameter tubular heat exchanger
- Two-stage gas valve with convertible technology that allows installer to activate the two-stage valve with the flip of a dipswitch
- Silicon Nitride igniter for long igniter life
- Furnace control board with self-diagnostics, color-coded low-voltage terminals and provisions for electronic air cleaner and 24-volt humidifiers
- Control board stores the last five diagnostic codes in memory; simple push-button activation outputs the fault history to a flashing red LED
- Low constant fan allows homeowner to activate the low heat speed to efficiently circulate air throughout the home
- Self-adjusting feature automatically adjusts to high- or lowstage operation based on outside temperature without an outdoor temperature sensor
- Quiet, single-speed induced-draft blower
- All models comply with California NOx emissions standards
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Foil-faced insulation lines the heat exchanger compartment
- Designed for multi-position installation: upflow, horizontal left or right
- Removable bottom for side or bottom return applications
- Convenient left/right connection for gas/electric service
- Coil and furnace fit flush for most installations
- Parts: 10 Year Limited
- Unit Replacement: Limited
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf specification sheet
picture_as_pdf submittal sheet
picture_as_pdf warranty document
Specifications
Weight | 103 |
---|---|
Height | 33.5 |
Length | 28.5 |
Width | 17.5 |
AFUE | 80 |
AHRI - Usage | Indoor AHU |
Air Flow Direction | Upflow / Horizontal |
BTU Input | 60000 |
BTU Input | 60000 |
BTU Output | 48000 |
Blower Motor HP | 1/2 HP |
Blower Motor RPM | 1075 |
Blower Motor Speeds | 4 (Four) |
Blower Motor Type | PSC (Permanent Split Capacitor) |
Blower Wheel Diameter | 10" |
Blower Wheel Width | 8" |
Brand | Amana |
CFM | 1600 |
CFM Heating | 1600 |
Cabinet Width | 17.5 |
Country of Origin | USA |
Cubic Measurement | 9.6691 |
Cycle/Hertz | 60 Hz |
Dimensional Weight | 148 |
EAN | 0663051543416 |
ETL Listed | Yes |
Energy Star Rated | No |
Equipment Type | Furnace |
FER Compliant | No |
Filter Size | 16" x 25" |
Fuel Type | Natural Gas |
Full Load Amps | 7.9 |
Furnace Type | Gas |
Gas Connection Size | 1/2" |
Gas Connection Type | NPT |
Heating Stages | Two Stage |
Ignition Type | Hot Surface (HSI) |
Includes Filter Rack | No |
Maximum Overcurrent Protection (MOCP) | 15 |
OPT Code | AMH80604BN |
Package Height | 35.5 |
Package Length | 30 |
Package Weight | 103 |
Package Width | 18.5 |
Phase | Single |
Product Family | AMH8 |
Prop 65 | Yes |
Substantial Commodity | Steel; Copper; Aluminum |
UL Listed | No |
UPC | 663051571549 |
Voltage | 115 VAC |