Description
Specifications
Parts List
Description
The Daikin® brand DCH Series Commercial Packaged Heat Pump offers energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. Quality manufacturing as well as easy installation and maintenance make this unit one of the best values on the market.
Standard Features
Standard Features
- High-efficiency scroll compressor
- Copper tube / aluminum fin coils
- High- and low-pressure switches
- Refrigerant accumulator
- Contactor with lugs
- High-capacity, steel-cased filter drier
- Heater kits with single-point entry
- 24-volt terminal strip
- Convertible airflow orientation
- Easy to service
- Built-in filter rack with standard 2" filters
- Bottom utility entry
- AHRI Certified; ETL Listed
- 3-6 Tons with single speed blower motor units meet the performance specified in Table 6.8.1A of ASHRAE Standard 90.1-2010
- 6-ton with two-speed blower motor and two stage compressor meet the performance specified as of 1/1/2016 in Table 6.8.1-2 of ASHRAE STANDARD 90.1-2013
- Heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish
- Full Perimeter Rail
- Sloped drain pan
- Parts: 5 Year Limited
- Heat Exchanger: 20 Year Limited
California residents: see Proposition 65 Warning
Documents
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf wiring diagrams
picture_as_pdf consumer literature
picture_as_pdf specification sheet
picture_as_pdf submittal sheet
picture_as_pdf warranty document
Specifications
| Weight | 650 |
|---|---|
| Height | 42.8125 |
| Length | 48.1875 |
| Width | 74.0625 |
| AHRI - Usage | Packaged |
| Air Flow Direction | Convertible |
| Blower Motor HP | 1 1/2 HP |
| Blower Motor RPM | 1725 |
| Blower Motor Speeds | 1 (Single) |
| Blower Motor Type | ECM (Electronically Commutated Motor) |
| Blower Wheel Diameter | 11" |
| Blower Wheel Width | 10" |
| Brand | Daikin |
| CBU - Compressor Bearing Unit | Yes |
| CFM Cooling | 2400 |
| COP | 2.3-3.6 |
| Compressor Type | Scroll |
| Condenser Motor HP | 1/3 HP |
| Condenser Motor RPM | 1075 |
| Condenser Motor Speeds | 1 (Single) |
| Condenser Motor Type | PSC (Permanent Split Capacitor) |
| Cooling Capacity | 71000 |
| Country of Origin | USA |
| Cubic Measurement | 88.4219 |
| Cycle/Hertz | 60 Hz |
| Dimensional Weight | 1190 |
| Drain Connection Quantity | 1 |
| Drain Connection Size | 3/4" |
| Drive Type | Belt |
| EAN | 0663051553668 |
| EER | 11.1 |
| ETL Listed | Yes |
| Electric Heat Range [kW] | 0 |
| Energy Star Rated | No |
| Equipment Type | Heat Pump |
| Evaporator Coil Metering Device | Piston or Flowrator - Fixed Metering Device |
| Fan Diameter | 22 |
| HSPF | 7.7 |
| Heating Capacity | 39000-70000 |
| IEER | 11.2 |
| Locked Rotor Amps (LRA) | 123 |
| Maximum Overcurrent Protection (MOCP) | 45 |
| OPT Code | DCH072XXX3BXXX |
| Package Height | 44.5 |
| Package Length | 74.5 |
| Package Weight | 708 |
| Package Width | 48.5 |
| Phase | Three |
| Product Family | DCH |
| Prop 65 | Yes |
| Rated Load Amps (RLA) | 19 |
| Refrigerant | R-410A |
| Return Air Filter Size (RA) | (4) 16" x 20" x 2" |
| SEER | 11.2 |
| Sound Level (dBA) | 78 |
| Stage | Single |
| Substantial Commodity | Steel; Copper; Aluminum |
| Tonnage | 6 |
| UL Listed | No |
| UPC | 663051506954 |
| Voltage | 208-230 VAC |