Design Polymerics

DP1030 Water Based Duct Sealer - Gray - 1 Gallon

Description

Specifications

Description

This fiber reinforced, water based, UL Listed, high pressure/high velocity sealant allows for easier sealing of holes and gaps often found in commercial and residential supply and return air duct connections and joints. It exceeds all SMACNA seal and pressure classes and is recommended up to 15 inches water gauge pressure.

California residents: see Proposition 65 Warning

Documents

picture_as_pdf consumer catalog

picture_as_pdf safety data sheet

picture_as_pdf specification sheet

Specifications

Weight 12.45
Height 7.75
Length 7.5
Width 7.5
Application Temperature 40°F to 110°F (4.4°C to 43.3°C)
Base Water
Brand Design Polymerics
Composition Proprietary Water-based formula
Country of Origin USA
Coverage Dependent on application thickness, 80-90 sq. ft. at 20-40 wet mils
Cubic Measurement 0.2523
Dimensional Weight 4
Dry Time Dry time (DTT) = 1-2 hours, cure through 24-48 hours
EAN 0892736001020
Flame Resistant No
For Use With Duct sealant for commercial and residential supply and return air duct use, for sealing joints, seams, and duct wall penetrations, for sealing connections on flexible duct
Package Height 7.75
Package Length 7.5
Package Weight 12.45
Package Width 7.5
Prop 65 No
Service Temperature -25°F to 200°F (-31.67°C to 93.33°C)
Shelf Life 2 Years (unopened containers/ambient condition)
Size 1 Gallon
Solids Content 66 +/- 2%
Storage Temperature 40°F to 110°F (4.44°C to 43.33°C)
Substantial Commodity Petroluem
Temperature Range -25°F to 200°F (-31.67°C to 93.33°C)
Type Sealant
UL Listed Yes
UL Recognized Yes
UPC 892736001020
UV Resistant Yes
Viscosity Approx. 300,000 - 400,000 cps
Volume 1 gallon