Description
Specifications
Description
The ET4(B,Q)E Series of heat pumps offers exceptional performance. The unit, when combined with our engineered coils or air handlers, offers a full line of quality, split system cooling equipment.
- Designed using galvanized steel – with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units.
- Permanently Lubricated Motor – A heavy duty PSC motor for long lasting reliability and quiet operation
- Requires no maintenance and is completely protected from rain and snow
- Composite Base Pan – Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel
- Louvered Condenser Guard – Durable metal guard protects the coil from yard hazards and extreme weather
- Removable Top Grille Assembly – Allows ease of service from the top without disconnecting fan motor leads
- High Pressure Switch – Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits
- Liquid Line Filter Drier–Included with unit
- One Piece Top/Orifice – Designed for maximum airflow and quiet operation
- Five Minute Restart Time Delay – When the unit shuts down, a five minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
- Easy Compressor and Control Access – Designed to make servicing easier for the contractor, access panels
- are provided to all controls and the compressor from the side of the unit.
- Fixed Orifice – Integrated in liquid line service valve for easy change-out.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf specification sheet
picture_as_pdf wiring diagrams
Specifications
| Weight | 187 |
|---|---|
| Height | 41 |
| Length | 32 |
| Width | 32 |
| AHRI - Usage | Outdoor |
| Brand | Frigidaire |
| CBU - Compressor Bearing Unit | Yes |
| Compressor Type | Scroll |
| Condenser Motor HP | 1/8 HP |
| Condenser Motor Speeds | 1 (Single) |
| Condenser Motor Type | ECM (Electronically Commutated Motor) |
| Cooling Capacity | 30000 |
| Country of Origin | USA |
| Cubic Measurement | 24.2963 |
| Cycle/Hertz | 60 Hz |
| Dimensional Weight | 303 |
| ETL Listed | Yes |
| Energy Star Rated | Yes |
| Equipment Type | Heat Pump |
| Fins per Inch (FPI) | 14 |
| Inverter | No |
| Liquid Line Fitting Type | Sweat or Braze |
| Liquid Line Size (OD) | 3/8" |
| Locked Rotor Amps (LRA) | 64 |
| Maximum Overcurrent Protection (MOCP) | 25 |
| Package Height | 41 |
| Package Length | 32 |
| Package Weight | 187 |
| Package Width | 32 |
| Phase | Single |
| Product Family | ET4BE |
| Prop 65 | Yes |
| Rated Load Amps (RLA) | 12.8 |
| Refrigerant | R-410A |
| SEER | 14 |
| Sound Level (dBA) | 75 |
| Stage | Single |
| Substantial Commodity | Steel; Copper; Aluminum |
| Suction Line Fitting Type | Sweat or Braze |
| Suction Line Size (OD) | 3/4" |
| Tonnage | 2.5 |
| UL Listed | No |
| Voltage | 208-230 VAC |