Description
Specifications
Description
Standard Features:
- R-410A Refrigerant - Earth friendly non-ozone depleting refrigerant.
- Designed using galvanized steel - With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units.
- Copper Tube / Aluminum Fin Coils - Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
- Permanently Lubricated Motor - A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
- Louvered Condenser Guard - Durable metal guard protects the coil from yard hazards and extreme weather.
- Removable Top Grille Assembly - Allows ease of service from the top without disconnecting fan motor leads.
- Swept-Wing Fan Blade - Designed to significantly reduce unwanted noise.
- High Pressure Switch - Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
- Low Pressure Switch - Loss charge protection ensures long compressor life. Auto-reset feature prevents nuisance service trips.
- Liquid Line Filter Drier - Included with unit, field installed.
- One Piece Top/Orifice - Designed for maximum airflow and quiet operation.
- Five Minute Restart Time Delay - When the unit shuts down, a five minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
- Easy Compressor and Control Access - Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.
- Composite Base Pan - Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel.
- Fixed Orifice - Integrated in liquid line service valve for easy change-out.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf consumer literature
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf specification sheet
picture_as_pdf warranty document
Specifications
Weight | 210 |
---|---|
Height | 47 |
Length | 32 |
Width | 32 |
AHRI - Usage | Outdoor |
Brand | Frigidaire |
CBU - Compressor Bearing Unit | Yes |
CFM | 3400 |
Compressor Type | Scroll |
Condenser Motor HP | 1/5 HP |
Condenser Motor Speeds | 1 (Single) |
Condenser Motor Type | PSC (Permanent Split Capacitor) |
Cooling Capacity | 36000 |
Country of Origin | USA |
Cubic Measurement | 27.8519 |
Cycle/Hertz | 60 Hz |
Dimensional Weight | 347 |
EER | 11-12.2 |
ETL Listed | Yes |
Energy Star Rated | No |
Equipment Type | Heat Pump |
Fan Diameter | 24 |
Fins per Inch (FPI) | 20 |
HSPF | 8 |
Heating Capacity | 36800 |
Inverter | No |
Liquid Line Fitting Type | Sweat or Braze |
Liquid Line Size (OD) | 3/8" |
Locked Rotor Amps (LRA) | 79 |
Maximum Overcurrent Protection (MOCP) | 35 |
Package Height | 47 |
Package Length | 32 |
Package Weight | 210 |
Package Width | 32 |
Phase | Single |
Product Family | FT4BD |
Prop 65 | Yes |
Rated Load Amps (RLA) | 16.6 |
Refrigerant | R-410A |
SEER | 13 |
Sound Level (dBA) | 70 |
Stage | Single |
Substantial Commodity | Steel; Copper; Aluminum |
Suction Line Fitting Type | Sweat or Braze |
Suction Line Size (OD) | 7/8" |
Tonnage | 3 |
UL Listed | No |
Voltage | 208-230 VAC |