Description
Specifications
Description
These TF Series gas-fired unit heaters offer the latest tubular heat exchanger technologies with an innovative "In-Shot" burner system for superior durability, reliability, and performance. They can be vented both vertically and horizontally, which makes installation easier and more cost effective by allowing the installer to use existing venting components.
Features
Features
- Single stage combination gas valve
- Direct spark ignition
- Hot surface pilot ignition system
- 20 gauge jacket panels w/ baked enamel finish
- Individually adjustable and removable louvers
- Power vented
- Easy access control panel
- Certified for category I and III venting
- Terminal strip low voltage wiring
- 83% thermal efficiency
- 10 year defect warranty on heat exchanger, flue collector, and burners
- Factory fire tested
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf specification sheet
picture_as_pdf submittal sheet
picture_as_pdf consumer catalog
picture_as_pdf parts list
Specifications
Weight | 155 |
---|---|
Height | 33.75 |
Length | 25.25 |
Width | 43.5 |
Air Flow Direction | Horizontal |
Amps | 6.9 |
BTU Input | 150000 |
BTU Input | 150000 |
BTU Output | 124500 |
Brand | Sterling HVAC Products |
CFM | 2400 |
CSA Certified | No |
Certifications | NFPA 70; NFPA 54; ASHRAE 90.1 Section 6 Heating, Ventilating & AC |
Connection Size | 1/2" |
Connection Type | Threaded |
Country of Origin | USA |
Cubic Measurement | 21.4526 |
Cycle/Hertz | 60 Hz |
EAN | 0700202009435 |
Energy Star Rated | No |
Finish | Baked Enamel |
Flue Size | 5" |
Fuel Type | Natural Gas |
Full Load Amps | 4.7 |
Gas Connection Type | NPT |
Heat Exchanger Type | Steel |
Ignition Type | Direct Spark (DSI) |
Maximum Pressure (PSI) | 35 |
Motor HP | 1/4 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Phase | Single |
Prop 65 | Yes |
RPM | 1140 |
Thermal Efficiency | 83% |
UPC | 700202009435 |
Voltage | 115 VAC |