Product HighlightsGE® up/down outdoor condenser fan motors are designed for either vertical shaft-up or shaft-down air conditioning or heat pump applications. Shell and end shields are enclosed for weather protection. A weep hole is provided in each end shield to allow condensate to drain. A plastic plug is provided to seal the weep hole in the end shield exposed to the weather.
- 60 Hertz
- Single phase
- Overload protected
- Fan duty, continuous, air over
- 26" leads
- Totally enclosed, non-ventilated
- Class B insulation
- Thru bolt or band mounting
- All angle sleeve or ball bearings
- Water slinger on shaft
- Serrated end cap on shaft end only
- Full six inch shaft length with two full flats at 90°Reversible rotation
California residents: see Proposition 65 Warning
Weight 18.10 Pounds Length 14.60 Inches Width 6.80 Inches Height 7.40 Inches Country of Origin MEX Brand Genteq® Voltage 208-230 VAC Full Load Amps 3.4 Amps 3.4 Phase Single Cycle/Hertz 60 Hz Capacitor MFD µF 10 RPM 1075 Rotation Reversible Insulation Class Class B Motor HP 1/2 HP Motor Type PSC (Permanent Split Capacitor) Shaft Diameter 1/2" Shaft Length 12.02 Bearing Type Sleeve Duty Continuous Enclosure Closed Lead Length 26" Maximum Ambient Temperature 60°F (15.5°C) Mounting All Angle NEMA Frame 48 Number of Speeds 1 (Single) Protection Overload Protection Warranty Offered Yes Agency Compliance UL UL Listed Yes UL Recognized Yes
To see the pricing of the equipment you need to be a licensed provider. Click here to become a licensed provider.