Description
Specifications
Description
The B6VMAX Series Air Handlers, when combined with Nordyne's heat pump or air conditioner, offer a full line of quality, split system heating and cooling equipment.
Standard Features and Benefits
Standard Features and Benefits
- Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat.
- Quiet Blower Operation: Extra quiet and smooth blower on and off cycles.
- Constant airflow: Motor automatically adjusts to different static loads.
- Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities.
- Multi-poised: Can be used in horizontal, Upflow, Downflow and vertical applications.
- Built in Filter Rack: Makes the air handler easy to service.
- Plug-in Heater Kit: Available in 5 kw through 30 kw (Not for use in 115 Volt units)
- Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing
- Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied.
- Plastic Drain Pan: Provides corrosion resistance.
- Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray and resist corrosion 50% better than comparable units.
- Designed to meet the requirements 610.2.A.2: Meets Florida building code requirements for air leakage
- Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions.
- Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications.
- Anteater Coil Technology: Copper alloy with zinc additives to stop formicary corrosion.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf specification sheet
Specifications
Weight | 138 |
---|---|
Height | 51 |
Length | 22 |
Width | 27 |
AHRI - Usage | Indoor AHU |
Air Flow Direction | Multi-Position |
Blower Motor HP | 1/2 HP |
Blower Motor RPM | 1075 |
Blower Motor Speeds | Variable |
Blower Motor Type | ECM (Electronically Commutated Motor) |
Blower Wheel Diameter | 11" |
Blower Wheel Width | 8" |
Brand | Nortek Global HVAC |
CFM | 600-800 |
Cabinet Width | 19.75 |
Cooling Capacity | 36000 |
Country of Origin | USA |
Cubic Measurement | 17.5313 |
Cycle/Hertz | 60 Hz |
Dimensional Weight | 218 |
Drain Connection Quantity | 1 |
Drain Connection Size | 3/4" |
ETL Listed | Yes |
Electric Heat Range [kW] | 0 |
Energy Star Rated | No |
Equipment Type | Heat Pump |
Filter Size | 18" x 20" x 1" |
Includes Filter Rack | Yes |
Liquid Line Fitting Type | Sweat or Braze |
Liquid Line Size (OD) | 3/8" |
Maximum Overcurrent Protection (MOCP) | 15 |
Metering Device | TXV/TEV - Thermostatic Expansion Valve |
Package Height | 51 |
Package Length | 22 |
Package Weight | 138 |
Package Width | 27 |
Phase | Single |
Product Family | B6VM |
Prop 65 | Yes |
Refrigerant | R-410A |
SEER | 19 |
Stage | Single |
Substantial Commodity | Steel; Copper; Aluminum |
Suction Line Fitting Type | Sweat or Braze |
Suction Line Size (OD) | 7/8" |
Tonnage | 3 |
UL Listed | No |
Voltage | 208-230 VAC |