Description
Specifications
Description
Sterling's TF Series gas-fired unit heaters combine the latest tubular heat exchanger technologies with an innovative “In-Shot” burner system for superior durability, reliability and performance in a commercial unit heater.
Features
Features
- Provides 83% thermal (combustion) efficiency
- ETL certified in accordance with categories I and III venting requirements
- 20-gauge steel jacket panels with baked enamel finish
- Individually adjustable and removable louvers
- Single stage combination gas valve
- 115/1/60 volt fan motor with internal overload protection
- 20-Gauge Tubular Heat Exchangers
- Direct Spark Ignition System
- Power Vented
- Easy Access Control Panel
- Terminal Strip Low Voltage Wiring
- 10-Year Heat Exchanger Warranty
- Factory Fire Tested
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer catalog
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf parts list
picture_as_pdf specification sheet
picture_as_pdf submittal sheet
Specifications
Weight | 211 |
---|---|
Height | 33.75 |
Length | 37.25 |
Width | 43.5 |
Air Flow Direction | Horizontal |
Amps | 8 |
BTU Input | 250000 |
BTU Input | 250000 |
BTU Output | 207500 |
Brand | Sterling HVAC Products |
CFM | 3450 |
CSA Certified | No |
Certifications | NFPA 70; NFPA 54; ASHRAE 90.1 Section 6 Heating, Ventilating & AC |
Connection Size | 1/2" |
Connection Type | Threaded |
Country of Origin | USA |
Cubic Measurement | 31.6479 |
Cycle/Hertz | 60 Hz |
EAN | 0700202009466 |
Energy Star Rated | No |
Finish | Baked Enamel |
Flue Size | 5" |
Fuel Type | Natural Gas |
Full Load Amps | 5.8 |
Gas Connection Type | NPT |
Heat Exchanger Type | Tubular |
Ignition Type | Direct Spark (DSI) |
Maximum Pressure (PSI) | 35 |
Motor HP | 1/3 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Phase | Single |
Prop 65 | Yes |
RPM | 1140 |
Thermal Efficiency | 83% |
UPC | 700202009466 |
Voltage | 115 VAC |