Description
Specifications
Description
A draft inducer is a fan located inside a furnace near the heat exchanger. It turns on before the furnace ignites its burners and clears out any combustion gases that might be lingering from the previous heating cycle.
Verify replacement parts with the Parts List option on the East Coast Metal Distributors website and Mobile App.
Verify replacement parts with the Parts List option on the East Coast Metal Distributors website and Mobile App.
California residents: see Proposition 65 Warning
Specifications
Weight | 13 |
---|---|
Height | 6.5 |
Length | 10.5 |
Width | 7 |
Amps | 1.5 |
Basis Of Rotation View | Lead End |
Bearing Type | Self Aligning (SAB) |
Brand | Goodman |
CSA Certified | Yes |
CSA Listing | Yes |
CUL Listed | No |
CUL Recognized | No |
Capacitor MFD µF | 5 |
Country of Origin | MEX |
Cubic Measurement | 0.2765 |
Cycle/Hertz | 50/60 Hz |
Diameter | 5.63" |
Dimensional Weight | 4 |
Duty | Continuous (S1) |
Full Load Amps | 1.5 |
Insulation Class | B |
Motor Enclosure | Totally Enclosed Air Over (TEAO) |
Motor HP | 1/4 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Mounting Type | Stud |
NEMA Frame | 48Y |
Number of Speeds | 1 (Single) |
Package Height | 6.5 |
Package Length | 10.5 |
Package Weight | 13 |
Package Width | 7 |
Phase | Single |
Prop 65 | Yes |
Protection | Thermally Protection |
RPM | 830 |
Rotation | Counter Clockwise (CCW) |
Substantial Commodity | Steel; Copper |
UL Listed | No |
UL Recognized | Yes |
UOM | EA |
UPC | 193031101171 |
Voltage | 208-230 VAC |