Description
Specifications
Description
Thermaflex® S-LP-10 non-insulated Class 1 connector is designed for use in all pressure cooling and heating systems. It is used in either supply or return sections: for branch ducts and duct connections to or between mixing units, induction units, control or terminal units, and diffusion devices, including light troffers. It provides economical means
for handling misalignment between system components and ducts around obstacles where fabricated and fitted
ducts are difficult and costly to install. This duct is equally useful when making system extensions or changing conditioned zones.
for handling misalignment between system components and ducts around obstacles where fabricated and fitted
ducts are difficult and costly to install. This duct is equally useful when making system extensions or changing conditioned zones.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf specification sheet
picture_as_pdf submittal sheet
picture_as_pdf warranty document
picture_as_pdf consumer literature
Specifications
Weight | 15.3 |
---|---|
Height | 17.375 |
Length | 17.375 |
Width | 14 |
Brand | Thermaflex® |
Certifications | GreenGuard |
Compliance | NFPA 90 A and 90 B |
Composition | Fiberglass Cloth Fabric |
Core Material | Woven Fiberglass |
Country of Origin | USA |
Cubic Measurement | 2.4459 |
Dimensional Weight | 15 |
EAN | 0677431001113 |
Fire Rating | Meets UL 181 & NFPA 90A-90B Fire Codes |
Flex Length | 25' |
Flex Type | Uninsulated |
Inside Diameter | 14" |
Insulated | No |
Maximum Air Flow | 5000 FPM |
Maximum Pressure | Positive = 10" Negative = 1" |
Maximum Temperature | 250°F (121.11°C) |
Operating Temperature | -20°F to 250°F (-28.8°C to 121.1°C) |
Package Height | 17.375 |
Package Length | 17.375 |
Package Type | Box |
Package Weight | 15.3 |
Package Width | 6.625 |
Pressure Rating | WG - Positive 10 inches (2"-14" ID) - Negative 1 inch (2"-14" ID) |
Prop 65 | Yes |
Size | 14" x 25' |
Tier | S-LP-10 |
UL Listed | Yes |
UPC | 677431001113 |