Description
Specifications
Description
The ZD is a power close, and spring open damper with a 24-volt, spring-return, power-closed damper motor used to control circulating air in heating, cooling and ventilating systems. It is used when a normally-open damper is required, typically with the TotalZone® Systems and other electronic mini-zone damper systems.
Features
Features
- Reliable spring-return motor
- Fail-safe, normally-open operation
- Quiet operation with fewer blades
- Simple, easy-to-wire, two-wire operation
- Parallel blade design for low leakage performance
- Easy slip-in design
- Solid construction using extruded aluminum frame and blades
- Can be mounted on the side or bottom of the duct, as the application requires
California residents: see Proposition 65 Warning
Documents
picture_as_pdf specification sheet
Specifications
Weight | 7 |
---|---|
Height | 6.2 |
Length | 24 |
Width | 10.3 |
Amps | 0.32 |
Brand | Honeywell |
Composition | Extruded Aluminum frame, blades, Zinc Plated Steel, anodized Aluminum motor |
Country of Origin | MEX |
Cubic Measurement | 0.8869 |
Cycle/Hertz | 60 Hz |
Damper Type | Zone |
Dimensional Weight | 9 |
EAN | 0085267226530 |
Emergency Heat Switch | No |
Heat Pump Compatible | No |
Mounting | Can be installed in any orientation (mounting side can be on either the bottom or the side of the duct). |
Network Zoning | Yes |
Package Height | 6.2 |
Package Length | 24 |
Package Weight | 7 |
Package Width | 10.3 |
Phase | Single |
Power Method | 24-volt spring-return motor |
Prop 65 | No |
Shape | Rectangle |
Size | 16" x 10" |
UPC | 085267226530 |
Voltage | 24 VAC |