Description
Specifications
Description
These beam clamps are designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4” (19.05mm). The open U design permits rod adjustment. The universal design allows it to be used in an inverted position on the bottom flange of a beam as well.
California residents: see Proposition 65 Warning
Documents
picture_as_pdf specification sheet
Specifications
Weight | 0.33 |
---|---|
Height | 1.5 |
Length | 1.625 |
Width | 0.75 |
Brand | PHD |
Composition | Low carbon Steel with hardened Steel cup point set screw, locknut |
Country of Origin | USA |
Cubic Measurement | 0.0011 |
Diameter | .375" |
Dimensional Weight | 1 |
For Use With | #141 1/2"-4" , #143 1/2-4", #152 1/2"-3", #154 1/2"-3" , #155 #1, #180 1/2"-2" , #181 1/2"-2", #182 1/2"-2" , #430 1/2"-2", #440 1/2"-2", #441 1/2"-2", #442 1/2"-2", #450 1/2"-2", #450F 1/2"-2", #451 1/2-2", #451F 1/2"-2", #450V #1, #455 #1, #470 2", #508R 3/8"-2", #510R 3/8"-2", #512 3/8"-2", #512H 3/8"-2", #970 1/2"-2", #970F 1/2"-2" |
Package Height | 1.5 |
Package Length | 1.625 |
Package Weight | 0.33 |
Package Width | 0.75 |
Prop 65 | Yes |
Size | 3/8" |