Description
Specifications
Description
The B Series Hydronic Air Handlers are approved for installation in manufactured housing and mobile homes.
Features
Coil Features
Warranty See Warranty Certificate For Complete Details
Features
- Multi-position available from factory, or field convertible with accessory kit
- Filter rack door with thumb screws for easy access and replacement
- Fiberglass air filter comes with every air handler and filter racks accepts readily available size filters
- Cabinet constructed of heavy gauge painted steel and lined with High quality 5/8" foil-faced insulation
- UL lab tested 2% or less cabinet air leakage for better efficiency.
- Approved for installation in manufactured housing and mobile homes
Coil Features
- High efficiency lanced fin design
- R-22, R-410A, AC & Heat Pump compatible.
- Threaded expansion valves available factory installed or as a field installed kit.
- Air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
- Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
- Patented HydroTEC™ low water retention UV resistant drain pans are molded of high temperature (450°F) engineered polymer with dual 3/4" FPT condensate drains on front-left and front-right side
- Short cabinet with easy access.
- Non-captive refrigerant lines with long stubs make for easy installation.
- Enhanced refrigerant pipe grommets that are secure, tight, and easy to install.
- Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
Warranty See Warranty Certificate For Complete Details
- 5 Year "No Hassle"
California residents: see Proposition 65 Warning
Documents
picture_as_pdf installation instructions
picture_as_pdf specification sheet
picture_as_pdf wiring diagrams
Specifications
Weight | 99 |
---|---|
Height | 44 |
Length | 22 |
Width | 15 |
AHRI - Usage | Indoor AHU |
Air Flow Direction | Multi-Position |
Amps | 3.2 |
BTU Output | 51195 |
Blower Motor HP | 1/3 HP |
Blower Motor Speeds | 3 (Three) |
Blower Motor Type | PSC (Permanent Split Capacitor) |
Blower Wheel Diameter | 9" |
Blower Wheel Width | 6" |
Brand | Advanced Distributor Products |
CFM | 800 |
Cabinet Width | 22 |
Cased | Yes |
Coil Shape Designation | A-Coil |
Connection Type | Sweat |
Cooling Capacity | 24000 |
Country of Origin | USA |
Cubic Measurement | 8.4028 |
Cycle/Hertz | 60 Hz |
Dimensional Weight | 105 |
Drain Connection Quantity | 2 |
Drain Connection Size | 3/4" |
ETL Listed | Yes |
Electric Heat Range [kW] | 0 |
Energy Star Rated | No |
Equipment Type | Hydronic |
Filter Size | 12" x 20" x 1" |
Heat Pump Compatible | Yes |
Heating Capacity | 24000 |
Includes Filter Rack | Yes |
Liquid Line Fitting Type | Sweat or Braze |
Liquid Line Size (OD) | 3/8" |
Maximum Overcurrent Protection (MOCP) | 15 |
Maximum Pressure (PSI) | 640 |
Metering Device | TXV/TEV - Thermostatic Expansion Valve |
Motor HP | 1/3 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Package Height | 44 |
Package Length | 15 |
Package Weight | 120 |
Package Width | 22 |
Phase | Single |
Product Family | B Series |
Prop 65 | Yes |
Rated Current Amps (RCA) | 15 |
Rated Load Amps (RLA) | 15 |
Refrigerant | R-410A |
Rotation | Counter Clockwise (CCW) |
Sound Level (dBA) | 51 |
Stage | Single |
Substantial Commodity | Steel; Copper; Aluminum |
Suction Line Fitting Type | Sweat or Braze |
Suction Line Size (OD) | 3/4" |
Tonnage | 2 |
UL Listed | No |
UL Recognized | No |
UPC | 888082426266 |
Voltage | 120 VAC |