Description
Specifications
Description
The B Series Hydronic Air Handlers are approved for installation in manufactured housing and mobile homes.
Features
Coil Features
Warranty See Warranty Certificate For Complete Details
Features
- Multi-position available from factory, or field convertible with accessory kit
- Filter rack door with thumb screws for easy access and replacement
- Fiberglass air filter comes with every air handler and filter racks accepts readily available size filters
- Cabinet constructed of heavy gauge painted steel and lined with High quality 5/8" foil-faced insulation
- UL lab tested 2% or less cabinet air leakage for better efficiency.
- Approved for installation in manufactured housing and mobile homes
Coil Features
- High efficiency lanced fin design
- R-22, R-410A, AC & Heat Pump compatible.
- Threaded expansion valves available factory installed or as a field installed kit.
- Air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
- Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan
- Patented HydroTEC™ low water retention UV resistant drain pans are molded of high temperature (450°F) engineered polymer with dual 3/4" FPT condensate drains on front-left and front-right side
- Short cabinet with easy access.
- Non-captive refrigerant lines with long stubs make for easy installation.
- Enhanced refrigerant pipe grommets that are secure, tight, and easy to install.
- Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
Warranty See Warranty Certificate For Complete Details
- 5 Year "No Hassle"
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf specification sheet
picture_as_pdf warranty document
Specifications
Weight | 140 |
---|---|
Height | 48 |
Length | 22 |
Width | 18.5 |
Air Flow Direction | Multi-Position |
Blower Motor HP | 1/2 HP |
Blower Motor Speeds | 5 (Five) |
Blower Motor Type | ECM (Electronically Commutated Motor) |
Blower Wheel Diameter | 10" |
Blower Wheel Width | 8" |
Brand | Advanced Distributor Products |
CFM | 1000 |
Cooling Capacity | 30000 |
Country of Origin | USA |
Cubic Measurement | 11.3056 |
Cycle/Hertz | 60 Hz |
Drain Connection Quantity | 2 |
Drain Connection Size | 3/4" |
ETL Listed | Yes |
Electric Heat Range [kW] | 0 |
Energy Star Rated | No |
Equipment Type | Hydronic |
Filter Size | 16" x 20" x 1" |
Liquid Line Fitting Type | Sweat or Braze |
Phase | Single |
Product Family | B Series |
Prop 65 | Yes |
Refrigerant | R-410A |
Stage | Two |
Substantial Commodity | Steel; Copper; Aluminum |
Suction Line Fitting Type | Sweat or Braze |
Tonnage | 2.5 |
UL Listed | No |
UPC | 888082617343 |
Voltage | 120 VAC |