Advanced Distributor Products
F Series Premier Low Profile Multi-Position Air Handler - 3-1/2 to 4 Ton - 14 Seer
Description
Specifications
Description
F Series Premier Multi-Position air handlers are compact, efficient solutions for single or multi-family applications. Featuring antimicrobial product protection by Microban®, Healthy Solutions® air handlers are made for seamless installation and easy access with proprietary testing technology to ensure leak-free performance at the higher operating pressures of R-410A systems.
Features
Cabinet Features
Features
- 5-speed high efficiency ECM motor
- Dynamically balanced blowers for quiet, vibration-free operation
- ENERGY STAR compliant
- Fan time delay factory installed (1 second on, 45 seconds off)
- Line voltage connections can be made on top, right or left side of cabinet
- Coils are air pressure tested at 500psi, leak tested with helium, sealed with rubber plugs, and then charged with dry air
- Suitable for use with R-22 and R-410A
- Lanced fin design
- Rifled copper tubing
- TXV Bulbs come standard attached to header assembly
- Drain pans are molded of corrosion proof engineered polymer and have Microban protection, which inhibits the growth of mold and mildew that cause odors and staining.
- Dual 3/4" FPT condensate drains on left and right sides
Cabinet Features
- Constructed of heavy gauge painted steel
- Two independent front access panels allow for easy access to clean the coil, even after installation
- Only four (4) screws to remove blower panel for easier access
- Slide-out blower and coil assemblies
- High quality 5/8" foil-faced insulation lines cabinet, with cabinet flanges & retaining rods for better attachment
- Brackets hold coil assembly in place when installed in horizontal position
- Built in filter rack (filter not included).
- ETL lab tested 2% or less cabinet air leakage for better efficiency
- 10 Year Limited
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf specification sheet
picture_as_pdf consumer catalog
picture_as_pdf installation instructions
picture_as_pdf warranty document
Specifications
Weight | 155 |
---|---|
Height | 48 |
Length | 26 |
Width | 21.88 |
AHRI - Usage | Indoor AHU |
Air Flow Direction | Multi-Position |
Amps | 3.9 |
Blower Motor HP | 1/2 HP |
Blower Motor Speeds | 3 (Three) |
Blower Motor Type | PSC (Permanent Split Capacitor) |
Blower Wheel Diameter | 11" |
Blower Wheel Width | 10" |
Brand | Advanced Distributor Products |
CFM | 1600 |
Cabinet Width | 21.88 |
Coil Shape Designation | A-Coil |
Connection Type | Sweat |
Cooling Capacity | 48000 |
Country of Origin | USA |
Cubic Measurement | 15.7083 |
Cycle/Hertz | 60 Hz |
Drain Connection Quantity | 2 |
Drain Connection Size | 3/4" |
ETL Listed | Yes |
Electric Heat Range [kW] | 0 |
Energy Star Rated | No |
Equipment Type | Straight Cool |
Filter Size | 18" x 25" x 1" |
Heat Pump Compatible | Yes |
Includes Filter Rack | Yes |
Liquid Line Fitting Type | Sweat or Braze |
Liquid Line Size (OD) | 3/8" |
Maximum Overcurrent Protection (MOCP) | 4 |
Metering Device | TXV/TEV - Thermostatic Expansion Valve |
Motor HP | 1/2 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Phase | Single |
Product Family | F Series |
Prop 65 | Yes |
Refrigerant | R-410A |
Stage | Two |
Substantial Commodity | Steel; Copper; Aluminum |
Suction Line Fitting Type | Sweat or Braze |
Suction Line Size (OD) | 7/8" |
Tonnage | 4 |
UL Listed | No |
UL Recognized | No |
UPC | 888082400433 |
Voltage | 208-240 VAC |