Description
Specifications
Description
This condenser motor features a revolutionary self-aligned, rugged Ball bearing design that requires no further lubrication and is capable of all angle mounting and can handle high ambient conditions and excessive radial and axial loading. There are run Capacitor connections for both Condenser fan and direct drive furnace blower motors are insulated for increased safety and extended mounting bolts on lead end of motor. For shaft up application, simply reverse the direction of the bolts.
California residents: see Proposition 65 Warning
Specifications
| Weight | 20.12 |
|---|---|
| Height | 5.625 |
| Length | 4.607 |
| Width | 5.625 |
| Amps | 1 |
| Bearing Type | Self Aligning (SAB) |
| Brand | TRADEPRO® |
| Capacitor MFD µF | 5 |
| Country of Origin | MEX |
| Cubic Measurement | 0.0844 |
| Cycle/Hertz | 60 Hz |
| Dimensional Weight | 4 |
| Duty | Continuous (S1) |
| EAN | 0816075029644 |
| Full Load Amps | 1 |
| Insulation Class | B |
| Lead Length | 36" |
| Motor Enclosure | Totally Enclosed Air Over (TEAO) |
| Motor HP | 1/6 HP |
| Motor Type | PSC (Permanent Split Capacitor) |
| NEMA Frame | 48Y |
| Number of Speeds | 1 (Single) |
| Package Height | 6 |
| Package Length | 12.5 |
| Package Weight | 20.12 |
| Package Width | 6.5 |
| Phase | Single |
| Prop 65 | No |
| Protection | Automatic |
| RPM | 825 |
| Rotation | Counter Clockwise (CCW) |
| Service Factor | 1 |
| Shaft Diameter | 0.5" (1/2") |
| Shaft Length | 5" |
| Substantial Commodity | Steel; Copper |
| Thermal Protection | Yes |
| UL Recognized | Yes |
| UOM | EA |
| UPC | 816075029644 |
| Voltage | 208-230 VAC |