Description
Specifications
Description
The Sterling XF Series Convertible Venting Type Tubular Gas-Fired Unit Heater is designed to provide maximum and uniform heat transfer in either standard or separated combustion venting configurations without requiring modification to the unit itself. Separated combustion venting configurations can be used where dusty, dirty or mildly corrosive conditions exist, or where high humidity or slightly negative pressures prevail.
Features
Features
- ETL certified in accordance with categories I and III venting requirements
- Utilizes a direct spark pilotless ignition of the burner, providing fast heat delivery
- Incorporates an integrated electronic control board to regulate the system sequence of operation, including an externally mounted LED indicator for simple troubleshooting
- Controls are located in one centrally located control panel for easy access
- 20-gauge aluminized steel tubular heat exchanger
- 83% thermal efficiency
- Power venter
- 20-gauge steel cabinetry with baked enamel finish
- Direct spark ignition system
- Redundant single stage gas valve
- Rear burner access for ease of service
- Individually adjustable and removable horizontal louvers
- 10-year heat exchanger, flue collector and burner warranty
California residents: see Proposition 65 Warning
Documents
picture_as_pdf consumer literature
picture_as_pdf installation instructions
picture_as_pdf specification sheet
picture_as_pdf consumer catalog
picture_as_pdf warranty document
picture_as_pdf submittal sheet
Specifications
Weight | 157 |
---|---|
Height | 33.75 |
Length | 32.5 |
Width | 25.25 |
Air Flow Direction | Horizontal |
Amps | 6.9 |
BTU Input | 150000 |
BTU Input | 150000 |
BTU Output | 124500 |
Brand | Sterling HVAC Products |
CFM | 2400 |
CSA Certified | No |
Connection Size | 1/2" |
Connection Type | NPT |
Country of Origin | USA |
Cubic Measurement | 35 |
Cycle/Hertz | 60 Hz |
Energy Star Rated | No |
Flue Size | 5 inch diameter |
Fuel Type | Natural Gas |
Full Load Amps | 6.9 |
Gas Connection Size | 1/2" |
Gas Connection Type | NPT |
Heat Exchanger Type | Tubular |
Ignition Type | Direct Spark (DSI) |
Maximum Pressure (PSI) | 0.5 PSI |
Maximum Temperature | 104°F (40°C) (Max Ambient Temperature), 170 °F (76.67°C) (Max Unit Discharge Temperature) |
Motor HP | 1/4 HP |
Motor Type | PSC (Permanent Split Capacitor) |
Prop 65 | Yes |
RPM | 1050 |
Range | AFUE |
UPC | 700202002405 |
Voltage | 115 VAC |